Electronic products are susceptible to moisture and you should choose the electronic desiccant that suits you from the inside out. Let your point products get the most effective moisture protection.
Electronic products mainly include: electronic circuit boards, electronic components, electronic devices, mobile phones, power supplies, motors, ICs, etc.
Many customers choose silicone desiccant when choosing electronic desiccant. Silica gel desiccant is good, but the price is relatively high. There is also a desiccant which is more suitable for electronic products, and has various properties of silica gel desiccant, which is more environmentally friendly and more affordable than silica gel desiccant.
Mineral desiccant is mainly used for controlling the relative humidity in the sealed storage and transportation of various products such as security, electronic appliances, clothing, shoes and hats, furniture, leather goods, bamboo and wood products, etc., and plays a role of moisture proof, mildew proof and quality assurance.
Advantages of activated clay desiccant: activated clay is a natural mineral product, harmless, thrown away after use, returning to nature, and will never cause environmental pollution. The 21st century is the era of “green products”, and as a live mineral is a pure natural green product, it is a rare upgrade in the desiccant industry.
Selection of electronic product desiccant packaging: mainly for composite paper, cotton paper, non-woven fabric, Aihuabu, it is recommended to choose tyvek/dupont
Because electronic products are mostly hard and angular products, the non-woven fabrics are relatively strong. In the process of transportation, storage and handling, they are not afraid of the accumulation of hard objects. The touch of sharp objects is not easy to crack the desiccant packaging. , the phenomenon of scraping. The texture of Aihua paper is not easy to break and leak.
The recommend usage of desiccant for electronics.
This depends mainly on the size of your electronics packaging space, the packaging mode. Air humidity to judge, common electronic components generally use 5g, mobile phone use 3g, printer use 20g, in order to use the size of your product, etc., you can also consult our customer service staff, she will carefully give you Analysis allows you to choose the most suitable desiccant product.
Sucessful moisture prevention:
Why use mont based desiccant for electronic products?
Nowadays, electronic components are moving toward miniaturization, and packaging is gradually moving toward cheaper. General electronic components are all plastic packages. However, the downside of the plastic package is that the humid gas enters the inside of the device through the joint surface of the package material and the component. On the one hand, the internal circuit is oxidized and corroded, and on the other hand, the high temperature during the assembly and soldering of the electronic component causes The humid gas entering the IC is thermally expanded to generate sufficient pressure to cause separation (delamination), wire bond damage, chip damage, and internal cracks. More severe cracks can extend to the surface of the component, causing the component to swell and burst. According to statistics, more than a quarter of the world's industrial manufacturing industries produce defective products and scraps caused by humid air.